Abstract Temporomandibular disorders (TMD) is a term used to describe a set of clinical conditions that may compromise the temporomandibular joint (TMJ) and masticatory muscles and/or associated structures, considered the most frequent cause of orofacial pain of non-dental origin. In recent years, many forms of physical therapy have been used in the treatment of TMD to reduce pain and improve the range of mandibular movement present in this impairment. Among these resources are kinesiotherapy (exercise), electrothermal and manual therapy, acupuncture, training posture, mobilizations, and biofeedback. Objectives To determine if exercises with or without occlusal splints are effective in reducing pain in patients with temporomandibular disorders (TMD) of myogenic origin. Methodology This systematic review was registered in the International Prospective Register of Systematic Reviews (CRD 42019134244). Controlled trials published in PubMed, Scopus, and Cochrane Library following PRISMA guidelines up to April 2022 were randomized and included. The population above 18 years, which evaluated the effectiveness of exercise with or without occlusal splints in reducing pain in patients with TMD of myogenic origin, diagnosed through the Research Diagnostic Criteria for Temporomandibular Disorders, was also included. There was no restriction on the period of publication. Cochrane risk of bias analysis was performed. Results Of the five included articles, all showed a reduction of pain, but without significant differences between the interventions performed. Additionally, studies that evaluated the quality of life and mandibular movements showed a reduction in pain, but no significant differences between therapies. Conclusion The analyzed studies showed no difference in the improvement of pain, quality of life, and mandibular movements between the groups that performed only exercises or the associated treatments.

Abstract This study aimed to investigate if SNP rs6313, SNP rs2770304, SNP rs4941573, and SNP rs1923884 of the 5-HT2A receptor gene and SNP rs6295 of the 5-HT1A receptor gene are associated with bruxism etiology. Methodology This systematic review was registered in PROSPERO (CRD42018094561). A search was conducted for articles published in or before May 2021. To qualify for eligibility in this review, the studies had to be case-controls, cohort or cross-sectional. The inclusion criteria were the articles with a group of patients with bruxism and a control group in which the presence of these SNPs was evaluated. The exclusion criteria were the investigations of other polymorphisms, the studies that did not consider a control group for comparison, case reports, and reviews. The NOS and JBI were used to evaluate the methodological quality of studies. Results We conducted this study with databases, such as Web of Science, Scopus, Embase, PubMed/MEDLINE, and ProQuest. We considered four studies eligible. A total of 672 participants were included,187 with sleep bruxism, 105 with awake bruxism, 89 with sleep and awake bruxism, and 291 controls. One study found a strong association between the SNPs rs6313, rs2770304 and rs4941573 of the 5-HT2A receptor gene and sleep bruxism. In one study, we considered the C allele of the SNP rs2770304 a risk factor for sleep bruxism. We found no significant results of other SNPs in sleep bruxers compared to controls. We found no positive association concerning the SNPs and groups of awake bruxism and sleep and awake bruxism. Conclusion The different results regarding the SNPs in sleep bruxers could be explained by the genetic distinction between Chilean, Mexican, Japanese, and Polish population. More clinical trials and prospective studies must be conducted with larger sample size and in different ethnicities to confirm the results of this review.

Abstract The objective of this systematic review and meta-analysis was to evaluate the effect of welding techniques on implant-supported prostheses and determine whether they contribute to a better adaptation compared with a one-piece cast. A search was conducted using the PubMed/MEDLINE, Embase, and Cochrane Library databases, and articles published until November 2017 were obtained from these databases. This review followed the PRISMA criteria and is registered on the PROSPERO platform (CRD42017081865). The PICO question was “Do welding procedures in one-piece cast implant-supported frameworks influence implant/abutment-framework marginal misfits?” Eleven studies were selected for a qualitative analysis, and seven studies were selected for a quantitative analysis. A total of 189 specimens were fabricated using different materials (cp-Ti, Ni-Cr, Cr-Co, and noble alloys), and welding techniques such as laser welding, conventional welding, tungsten inert gas, and brazing were applied. A vertical marginal misfit was measured using an optical microscope, a stereomicroscope, and/or a scanning electron microscopy. The qualitative analysis in the studies demonstrated a positive effect of the welding techniques on the adaptation of the infrastructures. The meta-analysis confirmed the results (p < 0.00001; MD: -36.14; 95%CI: -48.69 to -23.59). Within the limitations of this study and regarding the heterogeneity of the samples, we conclude that the soldering point technique is effective for obtaining relatively low values of marginal misfit, with laser welding as the most effective technique. However, additional studies were recommended due to the heterogeneity of different variables (alloys, connection, and misfit evaluation) in the included studies.

Resumo O objetivo deste estudo foi avaliar o efeito da variação do diâmetro e dos tipos de conexão na distribuição do estresse no osso cortical para implantes com a proporção coroa-implante. Seis modelos 3D foram simulados com os programas InVesalius, Rhinoceros 3D 4.0 e SolidWorks 2011. Os modelos foram compostos de osso da região mandibular posterior. Foram incluídos implantes de 8,5 mm de comprimento, diâmetro Ø 3,75 mm ou Ø 5,00 mm, e tipos de conexão como hexágono externo (EH), hexágono interno (IH) e cone Morse (MT). Os modelos foram processados usando os programas Femap 11.2 e NeiNastran 11.0 e usando uma força axial de 200 N e força oblíqua de 100 N. Os resultados foram registrados em termos da tensão principal máxima. O carregamento oblíquo mostrou alta tensão no osso cortical em comparação com a carga axial. Os resultados mostraram que os implantes com maior diâmetro apresentaram distribuição de tensões mais favorável, independentemente do tipo de conexão, enquanto que os implantes cone Morse apresentaram melhores distribuição de tensões comparado aos outros tipos de conexão, especialmente no carregamento oblíquo. Assim, os implantes de maior diâmetro foram mais favoráveis para distribuição das tensões na região de tecido ósseo cortical, enquanto que os implantes cone Morse apresentam menores concentrações de tensões do que as outras conexões.

Abstract The aim of this study was to evaluate the effect of varying the diameter, connection type and loading on stress distribution in the cortical bone for implants with a high crown-implant ratio. Six 3D models were simulated with the InVesalius, Rhinoceros 3D 4.0 and SolidWorks 2011 software programs. Models were composed of bone from the posterior mandibular region; they included an implant of 8.5 mm length, diameter Ø 3.75 mm or Ø 5.00 mm and connection types such as external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Models were processed using the Femap 11.2 and NeiNastran 11.0 programs and by using an axial force of 200 N and oblique force of 100 N. Results were recorded in terms of the maximum principal stress. Oblique loading showed high stress in the cortical bone compared to that shown by axial loading. The results showed that implants with a wide diameter showed more favorable stress distribution in the cortical bone region than regular diameter, regardless of the connection type. Morse taper implants showed better stress distribution compared to other connection types, especially in the oblique loading. Thus, oblique loading showed higher stress concentration in cortical bone tissue when compared with axial loading. Wide diameter implant was favorable for improved stress distribution in the cortical bone region, while Morse taper implants showed lower stress concentration than other connections.

Abstract Polymethyl methacrylate (PMMA) has been considered a suitable material for cranioplasty. However, no consensus has been reached concerning the best material for cranioplasty with regard to minimizing complications. Thus, this systematic review and meta-analysis aimed to compare the complication rates of PMMA with those of autologous bone and titanium mesh. This review was registered with PROSPERO (CRD42016042725). Systematic searches were conducted on PubMed/MEDLINE, Scopus, and Web of Science. The focus question was, “Do PMMA prostheses used in cranioplasty have complications rates similar to those of autologous bone and titanium mesh?” A meta-analysis of complication rates was performed on the basis of dichotomous outcomes assessed by risk ratio (RR) with corresponding 95% confidence intervals (CI). From 1014 data sources, 11 articles were selected according to eligibility criteria. These articles involved 1,256 individuals and 1,278 cranioplasties using autologous bone (n = 408), PMMA (n = 379), or titanium (n = 151). The follow-up period ranged from 63 days to 54.3 months. No difference was observed between the complication rates of PMMA and autologous bone (p = 0.94; RR, 0.98; 95%CI, 0.54–1.75) or between PMMA and titanium (p = 0.38; RR, 1.59; 95%CI, 0.57–4.48). Sub-analysis of the reasons for craniotomy (trauma/non-trauma) was conducted, which revealed no significant difference (p = 0.91; RR, 0.95; 95%CI, 0.37–2.42). The meta-analysis indicated that the use of PMMA yields complication rates that are near those of autologous bone and titanium mesh.